BISON KIT CONTACT ADHESIVE 55ML BISON KIT CONTACT ADHESIVE 55ML

BISON KIT CONTACT ADHESIVE 55ML DESCRIPTION BISON KITTUBE 55 ML (FOLDING BOX)Super-strong, liquid, universal contact adhesive.PROPERTIESBonds immediatelySuper-strongSuitable for materials under stressUniversalLiquidMoisture and frost resistantSimple to useResistant to temperatures between -40°C and +70°CSUITABLE FOR:Ideally suited for surface bonding or laminating of many materials that require immediate bonding, loading or processing. Bonds wood, board, veneer, plastic and metal panel boards (HPL, Formica, for example), (foam) rubber, leather, cork, canvas, linoleum and polyether foam (sound insulation), among other things, to itself as well as to many other surfaces. Also for repairing shoes, bags, toys, and carpets, or for doing (hobby) handicraft work.BEFORE USE:Working conditionsUse adhesive and parts to be bonded at room temperature only. The relative humidity must be below 65%. This is to avoid the formation of bubbles in the final product. Once attached, adjustment is no longer possible. Always test on an (inconspicuous) part of the surface first.Surface requirementsSurfaces must be dry, clean, dust- and grease-free and a good fit. Clean and degrease the surfaces to be bonded for optimal results.Preliminary surface treatmentFor optimal results, degrease first.ToolsUse a solid brush or fine-toothed (1 mm) glue spreader to cover large surfaces. Use a roller or rubber mallet to join the materials firmly.DURING USE:Directions for useParts must be clean, dry and free of grease. Coat both substrates completely. Allow drying for a minimum of 10-40 minutes. In the case of porous materials, apply a second coat and let dry. Then join parts and roll or tap firmly (with a rubber mallet).Points of attentionFor optimum results, both the adhesive and the parts to be bonded must be at room temperature (definitely do not use below +10°C). The final bonding strength depends on the pressure applied. Therefore, press as firmly as possible across the entire surface. Should the adhesive joint between porous materials be exposed to long-lasting contact with water, the adhesive may detach from the wet surface.AFTER USE:Stains/residueRemove wet adhesive residue immediately with Degreaser/Thinner for Bison Kit. Dried excess adhesive can only be removed mechanically or with a paint stripper (pre-test).Storage conditionsStore properly closed in a cool and frost-free place. Shelf life is a minimum of 24 months.  عرض المزيد
BISON KIT CONTACT ADHESIVE 55ML DESCRIPTION BISON KITTUBE 55 ML (FOLDING BOX)Super-strong, liquid, universal contact adhesive.PROPERTIESBonds immediatelySuper-strongSuitable for materials under stressUniversalLiquidMoisture and frost resistantSimple to useResistant to temperatures between -40°C and +70°CSUITABLE FOR:Ideally suited for surface bonding or laminating of many materials that require immediate bonding, loading or processing. Bonds wood, board, veneer, plastic and metal panel boards (HPL, Formica, for example), (foam) rubber, leather, cork, canvas, linoleum and polyether foam (sound insulation), among other things, to itself as well as to many other surfaces. Also for repairing shoes, bags, toys, and carpets, or for doing (hobby) handicraft work.BEFORE USE:Working conditionsUse adhesive and parts to be bonded at room temperature only. The relative humidity must be below 65%. This is to avoid the formation of bubbles in the final product. Once attached, adjustment is no longer possible. Always test on an (inconspicuous) part of the surface first.Surface requirementsSurfaces must be dry, clean, dust- and grease-free and a good fit. Clean and degrease the surfaces to be bonded for optimal results.Preliminary surface treatmentFor optimal results, degrease first.ToolsUse a solid brush or fine-toothed (1 mm) glue spreader to cover large surfaces. Use a roller or rubber mallet to join the materials firmly.DURING USE:Directions for useParts must be clean, dry and free of grease. Coat both substrates completely. Allow drying for a minimum of 10-40 minutes. In the case of porous materials, apply a second coat and let dry. Then join parts and roll or tap firmly (with a rubber mallet).Points of attentionFor optimum results, both the adhesive and the parts to be bonded must be at room temperature (definitely do not use below +10°C). The final bonding strength depends on the pressure applied. Therefore, press as firmly as possible across the entire surface. Should the adhesive joint between porous materials be exposed to long-lasting contact with water, the adhesive may detach from the wet surface.AFTER USE:Stains/residueRemove wet adhesive residue immediately with Degreaser/Thinner for Bison Kit. Dried excess adhesive can only be removed mechanically or with a paint stripper (pre-test).Storage conditionsStore properly closed in a cool and frost-free place. Shelf life is a minimum of 24 months.  عرض المزيد
QAR 7.50
QAR 7.50
+
-

BISON KIT CONTACT ADHESIVE 55ML

DESCRIPTION

BISON KIT
TUBE 55 ML (FOLDING BOX)
Super-strong, liquid, universal contact adhesive.
PROPERTIES
Bonds immediately
Super-strong
Suitable for materials under stress
Universal
Liquid
Moisture and frost resistant
Simple to use
Resistant to temperatures between -40°C and +70°C
SUITABLE FOR:
Ideally suited for surface bonding or laminating of many materials that require immediate bonding, loading or processing. Bonds wood, board, veneer, plastic and metal panel boards (HPL, Formica, for example), (foam) rubber, leather, cork, canvas, linoleum and polyether foam (sound insulation), among other things, to itself as well as to many other surfaces. Also for repairing shoes, bags, toys, and carpets, or for doing (hobby) handicraft work.
BEFORE USE:
Working conditions
Use adhesive and parts to be bonded at room temperature only. The relative humidity must be below 65%. This is to avoid the formation of bubbles in the final product. Once attached, adjustment is no longer possible. Always test on an (inconspicuous) part of the surface first.

Surface requirements
Surfaces must be dry, clean, dust- and grease-free and a good fit. Clean and degrease the surfaces to be bonded for optimal results.

Preliminary surface treatment
For optimal results, degrease first.

Tools
Use a solid brush or fine-toothed (1 mm) glue spreader to cover large surfaces. Use a roller or rubber mallet to join the materials firmly.

DURING USE:
Directions for use
Parts must be clean, dry and free of grease. Coat both substrates completely. Allow drying for a minimum of 10-40 minutes. In the case of porous materials, apply a second coat and let dry. Then join parts and roll or tap firmly (with a rubber mallet).

Points of attention
For optimum results, both the adhesive and the parts to be bonded must be at room temperature (definitely do not use below +10°C). The final bonding strength depends on the pressure applied. Therefore, press as firmly as possible across the entire surface. Should the adhesive joint between porous materials be exposed to long-lasting contact with water, the adhesive may detach from the wet surface.

AFTER USE:
Stains/residue
Remove wet adhesive residue immediately with Degreaser/Thinner for Bison Kit. Dried excess adhesive can only be removed mechanically or with a paint stripper (pre-test).

Storage conditions
Store properly closed in a cool and frost-free place. Shelf life is a minimum of 24 months.

 

BISON KIT CONTACT ADHESIVE 55ML

DESCRIPTION

BISON KIT
TUBE 55 ML (FOLDING BOX)
Super-strong, liquid, universal contact adhesive.
PROPERTIES
Bonds immediately
Super-strong
Suitable for materials under stress
Universal
Liquid
Moisture and frost resistant
Simple to use
Resistant to temperatures between -40°C and +70°C
SUITABLE FOR:
Ideally suited for surface bonding or laminating of many materials that require immediate bonding, loading or processing. Bonds wood, board, veneer, plastic and metal panel boards (HPL, Formica, for example), (foam) rubber, leather, cork, canvas, linoleum and polyether foam (sound insulation), among other things, to itself as well as to many other surfaces. Also for repairing shoes, bags, toys, and carpets, or for doing (hobby) handicraft work.
BEFORE USE:
Working conditions
Use adhesive and parts to be bonded at room temperature only. The relative humidity must be below 65%. This is to avoid the formation of bubbles in the final product. Once attached, adjustment is no longer possible. Always test on an (inconspicuous) part of the surface first.

Surface requirements
Surfaces must be dry, clean, dust- and grease-free and a good fit. Clean and degrease the surfaces to be bonded for optimal results.

Preliminary surface treatment
For optimal results, degrease first.

Tools
Use a solid brush or fine-toothed (1 mm) glue spreader to cover large surfaces. Use a roller or rubber mallet to join the materials firmly.

DURING USE:
Directions for use
Parts must be clean, dry and free of grease. Coat both substrates completely. Allow drying for a minimum of 10-40 minutes. In the case of porous materials, apply a second coat and let dry. Then join parts and roll or tap firmly (with a rubber mallet).

Points of attention
For optimum results, both the adhesive and the parts to be bonded must be at room temperature (definitely do not use below +10°C). The final bonding strength depends on the pressure applied. Therefore, press as firmly as possible across the entire surface. Should the adhesive joint between porous materials be exposed to long-lasting contact with water, the adhesive may detach from the wet surface.

AFTER USE:
Stains/residue
Remove wet adhesive residue immediately with Degreaser/Thinner for Bison Kit. Dried excess adhesive can only be removed mechanically or with a paint stripper (pre-test).

Storage conditions
Store properly closed in a cool and frost-free place. Shelf life is a minimum of 24 months.

 

المنتجات المعروضة مؤخرا Kürzlich angesehene Produkte